Planning on investing in belt disc sander? You came to the right place, as through this article, we shall provide you enough useful information that will help and aid you in choosing the best belt disc sanders for your benchtop.
Having a reliable belt disc sander will provide you an amazing sanding job and will help you save more money in the future. Though belt and disc sander could be purchased separately, it would be convenient to get a combination tool which provides versatility and allows you to save more space.
Stationary bench top belt and disc sanders work to give you precision edge. It also flattens faces and edges, shapes contour and smoothens inside curves. Compared to portable belt sander, this provides more power and is considered as a fixed tool.
Quick Top Picks
Best Belt Disc Sanders
Jet J-41002 Benchtop Belt and Disc Sander
Specs:
- Cast Iron Construction
- Disc speed: 3,450 RPM
- Belt speed: 3,100 SFPM
- Disc table size: 10-3/4 x 7-1/2″
- Disc size: 8″
- Belt size: 2 x 42 inches
- Disc table tilt: 45 degrees
- Motor: 3/4 HP, 115-volt, 1 phase
- Weight: 60 lbs
- Warranty: 2 years
Pros:
- Powerful
- Heavy-duty
- Ideal for shop use
- Miter gauge turns and locks at 45 degrees both sides
Cons:
- You will need to remove the table to change the belt
- A bit expensive
- Not recommended for industrial use
Rikon 50-112 Belt Disc Sander
If you are looking for a belt disc sander that will provide you the best value for your money, we highly recommend Rikon 50-112 Belt Disc Sander. It allows you to adjust it from 0 to 90 degrees and it comes with small stationary work table. Furthermore, its body is made of cast iron and steel which makes it more stable and it lessens the vibration. Its engine works at ½ horsepower which ensures you could do any light shop jobs. This belt disc sander is not recommended for heavy work as it could bog down the motor. The performance is impressive for light work. This belt disc sander is perfect for DIYers and hobbyists.
50-112 offers a 5-year warranty and is priced reasonably.
Specs:
- 4 in x 36 in belt
- 6 in disc sander
- Belt sander tilts to 90 degrees
- 6 ¼ in x 9 in table for disc sander
- ½ horsepower
- 38.5 lbs
- 5-year warranty
Pros:
- Great value for the quality
- Easy to change the belt
- Belt adjustable from 0 to 90 degrees
- Cast iron and steel body for stability
- Minimal vibration
- Disc does not stick up above the belt
Cons:
- Cannot be used on heavy jobs
- Instruction booklet is not clear
WEN 6502 Belt Disc Sander
This belt sander could be adjusted from 0 to 90 degrees. It is made of cast aluminum which makes it very durable. It also comes with miter gauge which ensures it provides you the right consistency when sanding at an angle. It also ensures safety through its stop bar. Its engine provides 3600 rpm and ½ horsepower. This belt sander is perfect for those who are in a budget. It is affordable and it is perfect for casual DIYers. If you are working on a small project, this belt disc sander is a great option.
Specs:
- 4 in x 36 in belt
- 6 in disc sander
- ½ horsepower
- 41 lbs
- Belt sander tilts to 90 degrees
- Cast iron base
- 2-year warranty
Pros:
- Great value
- Affordable
- Heavy cast iron base
- Changing belt is easy
- Miter gauge and stop bar for safety
- Extended blade guard
Cons:
- Slight vibrations
- Cannot handle heavy loads
- Belt stops turning with too much pressure
- Recommended to be used on sand wood and not on any metal
Rikon 50-120 Belt Disc Combination Sander
This belt disc combination sander could be positioned at any angle. Its work table is made of cast iron which could be repositioned up to 45 degrees. It comes with ¾ horsepower engine which could handle almost any type of sanding job. The only downside of this belt disc combination sander is it is more expensive compared to other models and brands. 50-120 offers 5-year warranty. This combination sander is one of the most economical option.
Specs:
- 6 in x 48 in belt
- Belt sander tilts to 90 degrees
- 10 in disc sander
- ¾ horsepower
- 104 lbs
- Large 8 in x 14 in cast iron table for disc sander
- 5-year warranty
Pros:
- High quality build
- Operates vertically, horizontally and angle in between
- Cast iron table tilts to 45 degrees
- 10” disc does not stick out above the belt
- Heavy duty cast iron base
- Larger disc sander compared to other machines
- Quick release belt tension lever
Cons:
- Vibrates a little
- Complicated assembly
- Poorly tightened screws. Check before using
Grizzly H6070 Belt Disc Bench Sander
H6070 is more portable and compact compared to other belt disc bench sanders. It is lightweight with its 20.1 lbs. weight and its belt is only 1 inch wide. It could be tilted to 45 degrees. The engine is a bit less powerful with 1/3 horsepower. It is also reasonably priced and is perfect for metalwork and small wood projects. Though this machine does not have much power, it is reasonably priced.
Specs:
- 1 in x 30 in belt
- Disc sander work table tilts to 45 degrees
- ⅓ horsepower
- 4 in disc sander
- Sander work table tilts to 45 degrees
- 20.1 lbs
- 1-year warranty
Pros:
- Perfect for small DIY work
- Lightweight
- Easy to move
- Could work on wood and metal
- Easy to follow instructions
Cons:
- Limited surface area
- Limited motor which could not work for heavy duty jobs
Powertec BD4600 Bench Belt Disc Sander
If you are looking for fairly priced bench belt disc sander, Powertec BD4600 is perfect for you. Its belts are easy to replace and its work table is stationary. It comes with 1/3 horsepower and it could handle small and light metal work jobs. BD4600 is affordable and is a basic tool perfect for novice. It is not designed for huge and heavy work as it could bog down with a lot of pressure. If you are a DIYer or have small workshop, this machine is perfect for you.
Specs:
- 4 in x 36 in belt
- 6 in disc sander
- ⅓ horsepower
- 41 lbs
- Cast iron base
- Sander tilts from 0 to 90 degrees
- Work table
- 1- year warranty
Pros:
- Tilts to 90 degrees
- Could be used with wood and metal
- Easy to adjust and replace belts
Cons:
- Work table is stationary
- Could bog down with a lot of pressure
Buying Guide
Factors you would need to consider before buying your belt disc sander
Power
Ensure that the one that you will choose is powerful enough to handle the job or work you will do. If you are working on a small project, you will not have any problems. However, if you plan to work on heavy jobs, check if the tool could and will be able to handle it.
Ease of Maintenance
You will have to check if you could change the angles and adjustments easily. Is the changing the belt or disc easy and uncomplicated?
Versatility
There are some machines that provide more option and more flexible. Try to get one that could be adjusted and has a good tilt.
Dust Collection
This makes your machine more efficient and effective. We suggest that you check the specifications before choosing your belt disc sanders.
Quality vs. Price
As with everything else, you get what you pay for. The less expensive it is the more basic your machine gets. Though that is the case, we are not saying that you purchase the most expensive one. Ensure to strike a balance of quality and price.
Brands to Know
- RIKON
- Wen
- Grizzly
- Jet
- DeWalt
Conclusion
That concludes our article on best belt disc sanders. We hope you were able to get useful information that you could consider in choosing the best belt disc sander that would best suit your needs.
Comments